Announcements archive
E-newsletter Issue #47
June 25, 2008
In this issue:
- Non-uniform voltage distribution in new ElecNet
- Streamline Generator included with ElecNet
- New ThermNet v1.16 and MagNet v6.26.1 available
- What’s New in the Documentation Center
- Infolytica visits Asia
- Register for the next MagNet training course
- A new www.infolytica.com is coming
E-newsletter Issue #46
April 9, 2008
In this issue:
- New MotorSolve for Switched Reluctance and Induction Machines
- New Sizing Features and Additional Templates for MotorSolve BLDC
- Improved core loss now available in MagNet and MotorSolve BLDC
- Strategic partnership with Baoding Tianwei Group
- Iron loss separation, trends in high-torque BLDC Motors
- Iron Loss Calculations in Laminated Structures Using MagNet
- Documentation Center: Skin Depth Simulator
E-newsletter Issue #45
January 29, 2008
In this issue:
- Quadrupole Ion Trap using ElecNet
- Simulation of an Electrostatic Precipitator
- Electric Field Transient Analysis of a Conductive Shield
- New Case Study on Switched Reluctance Motors Available for Download
- Documentation Center: Updated Guidelines for Modeling Thin Regions
E-newsletter Issue #44
December 6, 2007
In this issue:
- New releases of MagNet, ElecNet, ThermNet and OptiNet
- Demonstration of improved 2D Meshing in latest releases: Transformer Bushing
- General Springs for dynamic mechanical effects
- New Extension Pack Consolidates Specialized Tools
- Vector Control supported in Plug-In for Simulink© facilitates design of energy efficient motors
E-newsletter Issue #43
August 29, 2007
In this issue:
- New release of MagNet design suite is Vista compatible
- ElecNet: Trial Edition now available for download
- Switched Reluctance Motor: Design and Analysis
- Demagnetization Analysis of a BDC motor
E-newsletter Issue #42
April 26, 2007
In this issue:
- Infolytica Corporation releases MotorSolve
- Design Example: Hybrid Electric Vehicle Motor with MotorSolve
- Design Example: PWM analysis using MotorSolve
E-newsletter Issue #41
March 29, 2007
In this issue:
- MotorSolve to be Released in April 2007
- Design Example: Introduction to MotorSolve
- Design Example: Winding Layouts, Analysis and Short Pitching with MotorSolve
- MagNet Success Story: MagneMotion
- Chicago Seminar Sign Up Deadline
Infolytica Announcement #40
February 14, 2007
- MagNet 6.23, ElecNet 6.15, and ThermNet 1.13 releases
- Seminar -- Electromagnetics and Electric Motors
- 2007 Magnetics Conference
- SAE 2007 World Congress
- CWIEME 2007
- MagNet training course (scheduled for May 15-17, 2007)
Infolytica Announcement #39
November 1, 2006
- 3D Coil Creator tool
- MagNet success stories: Loudsoft
- SMMA Fall Technical Conference
- Power Generation International
- MagNet training course (scheduled for Nov 14-16, 2006)
Infolytica Announcement #38
September 15, 2006
- MotorSolve brochure
- Design examples:
- 3D Simulation of Electromechanical Devices
- Optimization of an IPM Motor
- Magnetic and Thermal Simulation of Electrical Machines
- Electrical Manufacturing Expo
(Demo -- " MotorSolve sneak peak") - International Energy Agency ExCo Meeting
(Talk -- "State of the art in using finite elements for rotating machinery") - SMMA Fall Technical Conference
( Talk -- "The Impact of Software and Hardware Advances on Motor Design Tools") - Power Generation International
- MagNet training course (scheduled for Nov 14-16, 2006)
Infolytica Announcement #37
August 23, 2006
- MotorSolve preview
- MagNet success stories: Neuronetics and Eocycle
- Electrical Manufacturing Expo
- Power Generation International
- MagNet training course (scheduled for Nov 14-16, 2006)
New Gallery page(s):
- Optimizing Electromechanical and Control Circuit Parameters of Brushless Motors
Infolytica Announcement #36
April 19, 2006
- MagNet 6.22.1, ElecNet 6.14.1, and ThermNet 1.12.1 releases
- Chinese web site launch
- CEFC 2006 conference
- Inductica 2006
- MagNet training course (scheduled for May 16-18, 2006)
New Gallery page(s):
- Actuator in a System Simulation with Simulink®
- Actuator in VHDL-AMS with SystemVision®
- Clawpole in VHDL-AMS with SystemVision®
- TEAM-based Benchmark Family: Problem 21:
Field Loss Model for Power Transformer- TEAM-based Benchmark Family: Problem 21a:
Field Loss Model for Power Transformer- TEAM-based Benchmark Family: Problem 21b:
Field Loss Model for Power Transformer
Infolytica Announcement #35
March 15, 2006
- Highlights of MagNet 6.22, ElecNet 6.14, and ThermNet 1.12 releases
- Loss calculation in transient solvers available in latest version of MagNet
- Technical note on Thin shell meshing with layers
- MagNet Trial Edition documentation ideally suited for undergraduate courses
- APEC 2006 conference
- SAE World Congress 2006
- MagNet training course (scheduled for May 16-18, 2006)
Infolytica Announcement #34
January 26, 2006
- MagNet Trial Edition available as a free download
- Motor & Drive Systems 2006 conference
- APEC 2006 conference
- MagNet training course (scheduled for February 14-16, 2006)
New Gallery page(s):
- Variable Reluctance Sensor
Infolytica Announcement #33
November 15, 2005
- Infolytica releases the first 64-bit enabled applications for
Windows® x64 Editions
designed specifically for low frequency electromagnetics
New Gallery page(s):
- Clawpole in Motion
Infolytica Announcement #32
October 18, 2005
- Trajectory Evaluator Assistant 2.0 released
- MagNet Plug-in for SPEED upgraded to version 1.1.
- The year in review
- 3D tutorial on preparing, solving, and interpreting NDT problems
- ASNT Fall Conference 2005
- EIC-EME Expo 2005
Infolytica Announcement #31
September 9, 2005
- OptiNet 2.1 is released
- Three case studies/tutorials that examine a brushless DC Motor
- SMMA 2005 Fall Technical Conference
New Gallery page(s):
- Ensuring Electric Machine Efficiency with MagNet and OptiNet
- Advanced Optimization of an IPM (Interior Permanent Magnet) Machine
- Core Loss and Efficiency Calculations with Infolytica software
Infolytica Announcement #30
August 26, 2005
- MagNet 6.20, ElecNet 6.12, and ThermNet 1.10 are released , benefiting greatly from the new system architecture developed for Infolytica's migration to a 64-bit environment
New Gallery page(s):
- Brushless DC Motor in Motion with Temperature Effects
- Disk Induction Machine
- Power Transformer under Short-circuit condition
Infolytica Announcement #29
June 21, 2005
- MagNet Plug-in for SPEED 1.0 released
- Compumag 2005 conference
- User Conference 2005 recap
- MagNet training course (scheduled for August 16-18, 2005)
- Year 1 - Electromechanics and
Year 2 - Electrical Machines and Systems documents updated - 2D tutorial on preparing, solving, and interpreting NDT problems
New Gallery page(s):
- MagNet Plug-in for SPEED: Designing an IPM motor with fractional slot
Infolytica Announcement #28
May 12, 2005
- MagNet delivers more capabilities in both 3D circuit and 3D motion remeshing
- Introduced MagNet Plug-in for Simulink®
- IEMDC 2005 Trade Show
- Upcoming webinar on MagNet Plug-in for SPEED
- MagNet training course (scheduled for May 23-25, 2005)
- User Conference 2005 reminder
New Gallery page(s):
- Actuator with diode
- IPM Motor with velocity feedback vector control
Infolytica Announcement #27
March 10, 2005
- Introduced Mesh Layers feature in releases MagNet 6.18, ThermNet 1.9, ElecNet 6.11
- User Conference 2005 reminder
- SAE World Congress 2005 Trade Show
- Infolytica Seminars in China and Japan
New Gallery page(s):
- Nondestructive Testing Problems with Mesh Layer Feature
- WFNDEC Benchmark #2 - Eddy Current Inspection of Inconel Pipe
- Optimization of NDT Sensor Probe
Infolytica Announcement #26
February 4, 2005
- Introduced our new MagNet/PSIM Plug-in
- Major additions to the MagNet 6.17, ThermNet 1.8, ElecNet 6.10.1, SPEEDLink Assistant2.1,
and RIM Design Assistant 1.1 releases - User Conference 2005
- Motor & Drive Systems 2005 Trade Show reminder
- Upcoming Webinar on OptiNet
New Gallery page(s):
- IPM Motor with vector control (MagNet/PSIM Plug-in example)
Infolytica Announcement #25
January 17, 2005
- Highlights of the changes we've implemented on our new web site
- Major additions to the MagNet 6.16.3 release
- Motor & Drive Systems 2005 Trade Show
- Seminar on an optimization tool for electric motor design
- Upcoming Webinar
Infolytica Announcement #24
October 12, 2004
- ThermNet 1.8 release has more for motors and the capability to perform coupled transient-to-transient analysis
- Infolytica enters into a strategic partnership with SPEED
- upcoming release of MagNet 6.16.2
- Infolytica to present at SMMA Fall Technical Conference
- MagNet training course (scheduled for November 16 - 18, 2004)
- OptiNet training course (Friday, November 19, 2004)
Infolytica Announcement #23
August 6, 2004
- MagNet 6.16, ElecNet 6.10, and Trajectory Evaluator Assistant 1.2 releases with key features
- OptiNet 2.0 (with newly-added discrete optimization) to be released soon
- MagNet Training Course is scheduled for August 17 - 19, 2004
New Gallery page(s):
- Magnetic Gear
- Transformer Bushing Application
- Discrete-valued design optimization -- induction heating
- Gas Insulated Switch
- Deflection Yoke
Infolytica Announcement #22
April 21, 2004
- Multiple degrees of freedom
- New import/export options for CAD packages
- Contact resistance in commutator and position-controlled switches
- SPEEDLink Assistant, Infolytica's new & improved easy-to-use wizard
New Gallery page(s):
- MagLev Startup
- Arbitrary motion due to rotating magnets
- Levitation with arbitrary motion
- Watch Stepper Motor
- SPEEDLink Assistant examples
Infolytica Announcement #21
March 2, 2004
- Transient 3D with Motion is here
- next scheduled webinar on Wednesday, March 24, 2004 at 3PM EST
New Gallery page(s):
- Perforated Levitating Disk
- Permanent Magnet Stepper Motor
Infolytica Announcement #20
November 25, 2003
- New ElecNet release includes Transient 3D
- Announcing the creation of the Documentation Center
- MagNet 6.13, ThermNet 1.6, and OptiNet 1.1 releases coming soon with list of enhancements
- Important notice for users who are upgrading to the latest releases
- next scheduled webinar on Wednesday, December 3, 2003 at 3PM EST
- UGM 2003 recap
New Gallery page(s):
- Electric field due to a pulsed voltage waveform
Infolytica Announcement #19
June 20, 2003
- ThermNet 1.5 enters the 3rd dimension
- MagNet 6.12, ElecNet 6.8, ThermNet 1.5, and OptiNet 1.0 releases with list of enhancements
- next scheduled webinar on July 9th,
- OptiNet - The shape of things to come
- MagNet - The art of motor design
- MagNet - The best solution for your electromagnetics design needs
- MagNet Training Course is scheduled for August 12 - 14, 2003
New Gallery page(s):
- Coil Size Optimization - induction heating
- Induction hardening in 3D using surface impedance
Infolytica Announcement #18
June 9, 2003
- Introducing OptiNet -- The shape of things to come
- A special introductory price for OptiNet
New Gallery page(s):
- Brushless Motor: minimizing cogging torque
- Optimization - minimizing loudspeaker mass
- Shape optimization of a die press
- Surge Arrester: minimizing electric field stress in resistors
Infolytica Announcement #17
April 11, 2003
- The latest version of the Trajectory Evaluator Assistant
- MagNet Training Course is scheduled for May 13 - 15, 2003
New Gallery page(s):
- Floating Point: electromagnetic-thermal simulation
- Linking Infolytica's products with MATLAB®
- Open Boundary tool demonstration
Infolytica Announcement #16
March 5, 2003
- Introducing MultiNet 1.0, our coupled analysis software
- Announcing the release of MagNet 6.11.3, ThermNet 1.4.2, and ElecNet 6.7.2 with list of enhancements
- next scheduled webinar on March 19th
- New scripts and forms have been added the Free Add-ons section
- MagNet Training Course is scheduled for May 13 - 15, 2003
Infolytica Announcement #15
January 22, 2003
- Webinars
- MagNet Training Course is scheduled for February 11 - 13, 2003
New Gallery page(s):
- new default page now provides a thumbnail image of every example
- Full Field Views Using Partial Solutions
- Case hardening of a bearing raceway
- Lightning Arrester Simulation
Infolytica Announcement #14
November 26, 2002
- Free Add-ons
- UGM 2002 Recap redux
New Gallery page(s):
- New categories have been created in the New Gallery page(s):section
- Axial Flux Motor
- Claw-Pole Alternator
- Induction Motor with Skewed Rotor
- Brushless DC Cogging Torque with a Skewed Stator
- TEAM Problem 24 - Nonlinear Time-Transient Rotational Test Rig
Infolytica Announcement #13
November 6, 2002
- UGM 2002 recap
- MagNet Training Course is scheduled for November 12-14, 2002
- New releases -- MagNet 6.11.1, ElecNet 6.7, and ThermNet 1.4
New Gallery page(s):
- Coil Above A Crack (TEAM Problem 8)
- Nondestructive Evaluation (TEAM Problem 15)
- Eddy Current NDT and Deep Flaws (TEAM Problem 27)
Infolytica Announcement #12
October 4, 2002
- "What's New" is What's New
- A detailed agenda for Infolytica's User Group Meeting (UGM)
- Electrical Manufacturing & Coil Winding Expo 2002 Trade Show
- MagNet Training Course is scheduled for November 12-14, 2002
New Gallery page(s):
- Excel with MagNet
- Nodal Forces
Infolytica Announcement #11
July 23, 2002
- Announcing the release of MagNet 6.11 with a list of improvements
- Information about Infolytica's User Group Meeting (UGM), being held in Montreal on the 22nd and 23rd of October
- MagNet Training Course is scheduled for August 13 - 15, 2002
Infolytica Announcement #10
March 28, 2002
- new page, Packages, details Infolytica's complete line of products and their respective options
- Academics Program
- article on SPEED Software and its use with MagNet
- download New releases of ElecNet 6.6, MagNet 6.10.1, and ThermNet 1.3.1
- important notice regarding floating licenses
- MagNet Training Course is scheduled for May 14 - 16, 2002
Infolytica Announcement #9
December 20, 2001
- easier to navigate through our web site
- Download New releases of MagNet 6.10 and ThermNet 1.3, which include recent improvements that expand our software's 3D
- Field Sampler, the scripting form that allows the user to sample field values over a grid of points
- MagNet Training Course is scheduled for February 12 - 14, 2002
New Gallery page(s):
- Thin plate shield
- Induction heating past the Curie point
- Winding models using multi-segment sweep
Infolytica Announcement #8
November 16, 2001
- downloadable versions of our recently updated software product (ElecNet 6.5)
- Scripting discussion group
- ElecNet & FullWave training course is scheduled for December 11-13, 2001
New Gallery page(s):
- Loudspeaker analysis - Thermal effects in a transient solution
- Brushless DC Motor
Infolytica Announcement #7
October 5, 2001
New Gallery page(s):
- SPEED GDF Converter
- Analyzing MEMS-based RF Switches
- 2D/3D Magnetostatic -- A basic analysis of a loudspeaker design in 2D and 3D
- Automation -- Examples that use scripting to analyze loudspeakers
- Thermal effects -- Results of MagNet's capabilities in handling material properties that are functions of temperature
- Voice Coil Motion -- Analyzes the voice coil response to a signal using MagNet's 2D Transient with motion solver
- MagNet Training Course is scheduled for November 13 - 15, 2001
Infolytica Announcement #6
September 6, 2001
- UGM 2001 recap
- MagNet Training Course is scheduled for November 13 - 15, 2001
- Infolytica's ThermNet software. Download a brochure, now
- introduce its two latest products, RIM Design Assistant and Trajectory Evaluator Assistant
- A link between MagNet and SPEED
- An article on Scripting with MagNet
- Two new sections have been added to our Support area
- The Learning Center
- The Evaluation Center
Infolytica Announcement #5
July 20, 2001
- French version of our web site
- Infolytica's User Group Meeting (UGM) being held in Montreal on the 13th and 14th of August, is fast approaching
- introducing its latest products, (RIM Design Assistant) and (Trajectory Evaluator Assistant)
- download versions of recently updated software products (MagNet 6.9, ElecNet 6.4, and ThermNet 1.2)
New Gallery page(s):
- Detection & Healing demo
Infolytica Announcement #4
June 18, 2001
- Information about Infolytica's User Group Meeting (UGM)
- MagNet training course is scheduled for August 7-9, 2001 and November 13-15, 2001
- Electromagnetic/Thermal Seminars will be given in Toronto, Chicago, and Milwaukee
- Infolytica's participation in several trade shows to be held between June and October, 2001
- download versions of MagNet 6.8, ElecNet 6.4, and ThermNet 1.1
- ElecNet 6.5 is scheduled for release in mid July
Infolytica Announcement #3
February 22, 2001
- benefits of purchasing ThermNet,our new thermal analysis software
- write-up on the Material Modeler
- updated our page on Adaption
- download versions of MagNet 6.7, ElecNet 6.2, and ThermNet 1.0
- register for the next MagNet Training Course, scheduled for February 27 through March 1, 2001
New Gallery page(s):
- Bus Bar with Heat Sink
Infolytica Announcement #2
December 8, 2000
- Introducing ThermNet, Infolytica's new thermal analysis software
- download product brochures for MagNet and ElecNet
- Re-organization of the ONLINE LIBRARY section
New Gallery page(s):
- TEAM Problem 28: Levitating plate
- TEAM Problem 30: Single-phase induction machine
- Induction heating of a tube
- NAFEMS Benchmark for Thermal Analysis
Infolytica Announcement #1
November 2, 2000
- Breakdown of our web site