Electric category
|
Electric field due to a pulsed voltage source This ElecNet Gallery page examines a 3D transient electric field simulation of a simple copper strip on a dielectric layer over a ground plane. Categories: Electric / Insulators Products: ElecNet |
|
Gas Insulated Switch To demonstrate the flexibility of Infolytica's suite of Electromagnetic and Thermal Analysis packages, we have taken a Gas Insulated Switch and simulated it under a variety of different loads and configurations. Categories: Thermal / Electric / Multiphysics / Miscellaneous Products: MagNet Time Harmonic 3D / ElecNet / ThermNet Static 3D / ThermNet Transient 3D |
|
Iron loss separation; trends in high-torque BLDC Motors Hysteresis and eddy current loss trends in a high-torque BLDC machine are computed as a function of electrical loading, drive type and back Iron depths. An application of the results is also shown. Categories: Motors & Generators - AC / Design Optimization / Electric Products: MotorSolve |
|
Lightning Arrester Simulation The surge arrester example presented on these pages is based on a document from the International Electrotechnical Commission (IEC) -- "Guide for the determination of voltage distribution along the length of metal-oxide surge arresters". The ElecNet simulation results were compared to some results provided in this document. Categories: Electric Products: ElecNet |
|
Magnetron - Particle Trajectory The trajectory of an electron in a magnetron can be determined from the magnetic and electric fields present in the space between the cathode and the anode. In the analysis performed for this ElecNet example, the electric and magnetic field strengths are adjusted so that the electron does not reach the anode and forms a cyclic trajectory. Categories: Electric / Miscellaneous Products: MagNet General / MagNet Static 3D / ElecNet |
|
Surge Arrester: Minimizing Electric Field Stress in Resistors In this Gallery page, we show how the tandem of OptiNet and ElecNet was used to find the dimensions and the placing of the grading rings in a surge arrester, with the aim of lowering the max p.u. electric stress in the resistors. Categories: Design Optimization / Electric Products: ElecNet / OptiNet |
|
Transformer bushing application This gallery page demonstrates a two-dimensional analysis of capacitive bushings inside of an oil-insulated transformer using ElecNet's floating electrodes. Categories: Electric Products: ElecNet |